Standup Ball Bag

standing ball bag.jpg (145158 bytes)

click for  full size

  1. transfer patterns to tracing film then to leather and cut out.

  2. punch holes  punch. there should be 23 holes around the circle and 24 holes in the bag.

  3. punch drawstring holes with a  punch and cut slits between holes with a sharp knife or razor..

  4. sew the inside of the bag then down the side and around the bottom.

  5. Add a piece of lace for closing bag.

Home Page    Manuel Lisa    Articles    Equipment    Events/Pictures   Links  Trade Blanket